WALGREENS SINGLE USE CAMERA
PURE-DIGITAL CHIPS 2003-08-02
Here is the XFIG file of the above image should
you want to easly change the image
A: FLASH CONTROLLER?
SST MPF
39VF010
90-4C-WH
0242071-D
B: MEMORY? (16 MEG?)
ESMT
M12L64164A- 7T
PZF1V2027 0249
C: SoC
GRANDTECH
GT-8920LR
MV24760.1
0248
D: BIOS?
HULTEK?
HT1621
A250K0711-2
E: CCD
?
F: FLASH? (16 MEG?)
SAMSUNG 250
K9F2808U0B-YCB0
TT1029CB
G: ?
VC245A
1G0471
PP215C
ADDITONAL NOTE:
CAMERA MANUFACTURED BY "PURE DIGITAL TECHNOLOGIES" www.puredigitalinc.com
FCC ID: ?
DAUGHTER BOARD HAS "GW-05 GOODWLL 65100000677A" PRINTED ON IT
ALSO, ON UPPER-RIGHT TAB ON BACK VIEW THE BOARD HAD PRINTED "RS232" OVER 4 SODER JOINTS CONNECTING IT TO THE MAINBOARD.
THE POWER BOARD HAS "65100000505B" PRINTED ON IT
Hi-res boards (front)
Hi-res boards (back)
Walgreens single use digital camera
Pure Digital Technologies Inc.
2003-08-02
Below is a dump of /proc/bus/usb/devices showing the Pure Digital
walgreens camera after connecting a usb cable to it. Well this is where
my skills end and hopefully some hackers begin: let the drivers live!!
Note:
When the USB is attached correctly ther will be a low beep to sigal valid
power and a high beed to signal a USB connection.
The led indicator will lite solid and the display LCD will print "PC"
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 13 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=0819 Rev= 1.10
S: Manufacturer=PUREDIGITAL
S: Product=PUREDIGITAL
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=c400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms